GLS 1000 Mini Spray Dryer
Capacity : 100 – 1000 ml / hr water evaporation
Reproducible powder production at lab scale; Ideal for scale up to pilot or production; Proven performance – the most established & flexible instrument for LAB spray drying; Cost efficient — achieve reproducible result at minimal costs; Easy to use; Simple switching between two nozzle variants; High yields (upto 70%) Shorter times to optimize formulations
Additional Features :
- Online nozzle cleaning with deblocker
- 3-Fluid nozzle for spraying immiscible fluids
- Inert loop for condensation of solvents and feed back of inert gases
- Fast setup and cleaning times
- Lowest maintenance costs
- Requires only AC 200/230V; 50/60Hz power supply (other power requirements available)
- PC based operating system with ethernet interface
- Inert Loop for closed cycle spray drying
- Inlet – Pre + HEPA filters
- Outlet filter with pressure drop indication for optimal protection of the aspirator
A compact laboratory spray dryer with a maximum temperature of 26000 and liquid flow rate of up to 1000 ml per hour. This unit is ideal for research and development and sample preparation of many products. All units feature a simple and intuitive touch screen operation system with recipe functions and USB data logger.
Technical Specification GLS 1000 Mini Spray Dryer
- Evaporation capacity : 1000 ml / hr of water; higher for organic solvents
- Sample volume : 30 ml – 1 L
- Air flow max. : 50 cu.m/hr (free running)
- Heating power : 4 KW
- Max inlet temp. : 260° C; Accuracy ± 1° C
- Hot air flow : Co-current
- Nozzle type : Two-fluid nozzle with deblocker
- Nozzle diameter : 0.5 & 0.7 mm with deblocker assembly; 1.0 mm, 1.5 mm & 2.00 mm also available
- Compressor pressure : Max. 8 bar
- Typical yield : 40 – 70 %
- Operating conditions : Open, optional closed cycle with inert loop
- Power consumption : Max. 14 amps
- Voltage : 200 – 230 V; 50/60 Hz
- Dimension (H x W x D) : 1100 x 500 x 600 (mm)
- Weight : 60 kg
